A301-Small Bench - A302-Large Bench

A: Bench set to be stationary and firm

B: Bench set to rock slightly as you weave.

Bench Specifications

Small Bench
Seat width: 9" - Seat length: 27&1/2"
Adjustable height: 17" to 22"
Weight: 16 lbs

Large Bench
Seat width: 9" - Seat length: 32"
Adjustable height: 19" to 25"

Here the bench seat is lowered all the way down to the shelf level to give a good, compatible working height for threading or tie-up changes

Adjustable Loom Benches For Models A/6, 22/8, T/6, 36/8, or 50/8

Functional and beautiful, these loom benches are a sturdy design and are made of solid maple. They feature a tool box below the seat for convenient storage of weaving supplies. The seat height is adjusted easily by changing the position of the seat braces. A unique feature of these benches is that you can set them either to remain steady or to rock slightly as you weave. Most people find that the rocking motion adds comfort and lessens back fatigue.

The small bench is recommended for use on the A/6, 22/8, 36/6, and 36/8 looms. The large bench is recommended for the Model 50/8 looms.

Shipped as a complete kit with easy assembly instructions.

Tensioning Device for Warping (makes warping a breeze!)

This ingenious warping tool facilitates perfect tension every time when warping from front to back. Especially useful for weavers who warp alone. It allows for the option of putting on more or less drag depending on the type of warp and the requirements.

Note: The Tensioning Device is designed for weavers who prefer to weave from front to back.

If you want perfect warp tension every time, this is the tool for you.

The tensioning device consists of: 4 wooden bars, 2 wooden holders, 2 clamps, and instructions on how to use it.

These are available to custom fit any of the standard looms.

20 Yard Warping Reel with Brake System

This Warping Reel has the capacity to wind up to 20 yards of warp and is completely collapsible for easy storage. It is made of solid hardwood with a butcher-block maple base. Designed for table top use, it is 2 yards around and has 30" of vertical winding space. Three adjustable spreader bars with removable pegs allow for maximum flexibility in the placement of crosses in the warp chain.

These reels include an innovative brake system that creates just the right amount of resistance for easy chaining off.

Shipped as a complete kit with easy assembly instructions.
Light sanding and oiling are required. Sand paper & oil are provided.

12 Yard Warping Board

The Harrisville Designs 12 Yard Warping Board, made of solid hardwood, holds a full 12 yard warp and can accommodate two crosses. Each hardwood 3/4" peg is counter plugged and glued to insure maximum stability and the corners are fitted together with double overlapping dado joints. It is easily disassembled, with the use of corner wing nuts, for more convenient storage when not in use.

Shipped as a complete kit with easy assembly instructions.
Light sanding and oiling are required. Sand paper & oil are provided.

Sectional Warp Beam Harrisville Designs Sectional Warp Beams are available for all the looms. They are sturdily constructed and made of solid hardwood with unbreakable nylon pegs spaced at 2" intervals. The sectional beams are 18" in diameter for easy measurement and specially designed thread guides are included. Sectional beams are a great timesaver for long production warps.

Reeds Available: 6, 8, 10, 12, and 15 dent reeds in standard lengths to fit any of the looms, or other sizes can be specially ordered. Reeds are available in Regular Carbon Steel in 22", 36" and 50" and Stainless Steel in 22", 36", 40", 45", 50", 60".

Raddles

The Harrisville Designs Raddles are available in standard sizes to fit any of the looms or they can be custom made for use on any other loom.

Made of solid hardwood with hardwood pegs spaced at 1" intervals, the raddle helps to facilitate the proper spacing of your warp. The center peg is conveniently identified by its darker stain.

Raddles can also be made to order .

Umbrella Swift and Ball Winder This swift is a traditional design, made of wood and is easily collapsible for convenient storage. This is the perfect tool for unwinding skeins. The ball winder is a useful tool that winds yarn into center-pull balls directly from the swift. It clamps onto any shelf or table with ease.

Tool Trays

One of the trademarks of the Harrisville Designs looms is their high castles. Their tool trays take advantage of this design and create a convenient storage space where it is needed most. Extra shuttles, bobbins, and reed hooks can be stored in front of and directly above the weaving area. The shallow depth of the trays prevent tools from being out of sight. Made from the same hardwood as the looms, the tool trays become a practical and attractive addition. They come completely assembled and in various sizes to fit the different looms.

Wheel Assembly Kit

Attached Wheel

Loom Tipped

For A/6, 22/8, T/6 and 36/8 Looms. The wheels are set slightly above the base of the loom so they are out of the way when the loom is stationary and yet roll easily when the loom is tipped. And they can go through any door!

Attaching the wheels to your loom is a breeze. Easy-to-follow installation instructions included.

For prices please email Beth or call 781-863-1449